Screenberry logo
Skip to Content

Receiving NDI Streams

Use NDI In to receive an external NDI stream in a Screenberry project.

Receive a Stream

  1. Enable NDI output on the source device or application.
  2. Add an NDI In node to the project.
  3. Select the stream in Source.
  4. Connect Image to the required image-processing or display input. For audio, connect Audio to an audio-processing node or Audio Out.
  5. Check the received image, FPS, and audio output.

Settings

The Settings panel of the NDI In node offers the following control and information parameters:

GroupsGroups to search, separated by commas, for example Public,Stage. An empty value uses Public. Include the sender’s group.
IP AddressesComma-separated IP addresses of source computers to query when automatic discovery fails. Routing and firewall access must allow communication.
VolumeReceived audio level.
Audio Buffer SizeTarget buffer for received audio; default 100 ms. Increasing it can smooth uneven delivery but adds audio delay. This is separate from the global audio buffer.
Color FormatFastest (default) or Best Quality.
Frame Upload MethodMethod for transferring received frames to the GPU. Keep the default unless investigating frame-transfer performance.
Output Parameters
FPSMeasured incoming video frame rate; read-only.

Note: IP Addresses queries remote sources; it does not select a local network adapter. For adapter priorities, see NDI Network Configuration.

Reception Problems

SymptomCheck
Source missing or disappearedThe sender’s NDI output, source name, Groups, and firewall access. Add its address to IP Addresses if automatic discovery fails. Reselect the stream if its name changed.
Source listed, but no videoThe source in another receiver, the Image connection, and FPS. For multiple Windows adapters, check network configuration on the Media Server.
Video without audioSource audio, Volume, the Audio connection, and the output device’s channel mapping. See Working with Audio.
Audio interruptions or delayNetwork and system load, then Audio Buffer Size. More buffering increases delay.

If only the remote Screenberry Panel preview fails, check Panel preview reception.

Last updated on